Multi-Function Installation Safety Tester PeakTech P2755

This innovative combination meter for testing electrical installations according to VDE 0100 convinces by its technical performance in the high-end range.
With the large 3.5" TFT color display all important safety checks as the RCD-, Voltage-, Loop-, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer.
Since this new development was designed only according to the latest standards, the required measuring values can be even more convenient stored with an App (iOS / Android) via Bluetooth on the mobile phone, saved to an SD card or, when work is completed, from the internal data memory via USB connection to a PC.
Of course, the device is already equipped with an extensive range of accessories, all required test leads and any necessary software CD. An App for mobile phones can be downloaded additionally.
The built-in help function can display each measurement function with a connection-sketch, how a test must be carried out. Trough this and the graphical user interface, the device is easy to handle and applicable for all qualified electric personnel, technicians and engineers.
To ensure a daily use, this device is powered by standard rechargeable Ni-Mh batteries, which can be loaded built-in the device. Additional charged batteries can be carried with the user to always ensure the applicability or to extend the already high average operating time of 15 hours even during longer missions. Also this device can be recharged from the mains or by a 12V car adapter.
During use, this high quality unit is protected by its IP 65 protection rating against dust, jets of water on all sides and can be transported in the included carrying case safely. During the measurement process it can also safely be held comfortable with a carrying strap.

- 8.9cm (3.5") TFT colour display with backlight
- For measurements according to DIN VDE 0100/0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364
- Bluetooth interface for data transfer to a smart phone via Android or iOS App
- USB interface for evaluation on PC
- Internal memory and SD card for data recording
- Safety: EN 61010-1 ; CAT III 600 V, TÜV/GS
- Accessories: Carrying case, Strap, Test leads, Test clips, Insulation-Probe, Universal charger, Earthingrod, Car charger, rechargeable Batteries, Manual and Software CD

Display: 8.9cm / 3.5” TFT Display; 320 x 240 Pixel
Interface: USB, Bluetooth, SD-Card
Test standards: VDE 0100 / 0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364
Measurement functions: RCD-Test, Loop/Pfc, V, Low Ohm, RE, Insulation
Measurement L-PE: 0.23Ω to 999Ω; ±5% + 6 dgt
Measurement L-N: 0.23Ω to 999Ω; ±4% + 4 dgt
RCD current multiplier: x ½; x 1; x 2; x 5; ±1% + 1ms
RCD current: 10mA, 30mA, 100mA, 300mA, 650mA,1A
RCD trip-time (max): ½I∆N: 1999mS; I∆N: 500mS; 2xI∆N: 150mS; 5xI∆N: 40mS
Voltage measurements: 80 to 500VAC / DC; ±2% + 2 dgt
Frequency: 45 to 65Hz; ±2Hz
Insulation test: 0.125Ω to 1000MΩ @ 125V / 250V / 500V / 1000V; ±3% + 2 dgt
Low-ohm test: 0.000Ω to 2000Ω; 0.001Ω; ±1.5% + 3 dgt
Earth resistance: 0.000Ω to 2000Ω; 0.001Ω; ±2% + 30 dgt
Safety: CAT III 600V, IP65, SK II / Double Insulation, TÜV/GS
Operating voltage: 8x 1.2V Ni-MH rechargeable batteries / 8x 1.2V Ni-MH rechargeable batteries
Battery charger: 110 - 240VAC, 50/60Hz / 12VDC adapter
Dimensions (WxHxD): 240 x 105 x 145mm
Weight: 1560g
EAN-13: 4250569403002
RoHs compliant: yes
Info as pdf-file
Make: PeakTech
Type: P 2755 P2755

PeakTech Instruments (as html-file)
FLUKE Series (our assortment) (as html-file)
For more Multimeter and other Instruments (as html-file)
Measure and Display (our whole assortment)

Pictures are a guide only actual product may vary. Subject to alterations and errors.
Help us to eliminate errors: Please report any errors here.