16.40CHF
ab 10 14.96CHF
ab 50 14.04CHF
ab 100 13.29CHF

NTE3028 Infrared Emitting Diode VF=1.5V IF=150mA 5mm

Bestell-Nr.:    NTE3028


Verfügbarkeit:     PICTURE_ONLY_FULL PICTURE_ONLY_FULL
  Sofort lieferbar!


NTE3028 NTE-3028 | ECG3028 ECG-3028 | NTE Electronics NTE3028
Infrared Emitting Diode PN Gallium Arsenide

Description:
The NTE3028 is designed for applications requiring high power output, low drive power, and very fast response time. This device is used in industrial processing and control, light modulators, shaft or position encoders, punched card readers, optical switching, and logic circuits. It is spectrally matched for use with silicon detectors.

Features:
- High Power Output
- Infrared Emission
- Low Drive Current
- Popular TO18 Type Package for Easy Handling and Mounting

Info as pdf-file
NTE-ECG replacement list as pdf-file
NTE-ECG diagrams

Absolute Maximum Ratings:
Reverse Voltage, VR.................................................................6V
Forward Current, IF
Continuous................................................................ 60mA
Peak (PW = 100μs, Duty Cycle = 2%)............................................ 1A
Total Device Dissipation (TA = +25°C), PD.......................................... 250mW
Derate Above 25°C (Note 1)............................................ 2.27mW/°C
Operating Temperature Range, TA.......................................... -55° to +125°C
Storage Temperature Range, Tstg.......................................... -65° to +150°C

Note 1. Printed circuit board mounting.


Unser Halbleiter Katalog (ohne NTE-Sortiment)
NTE Sortiment (unser ganzes Sortiment)
Einzel-Halbleiter (ganzes Sortiment)

Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind.
Anzahl:
Bewertungen

Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
Schnellsuche
1 x Draht-Widerstand 0.39R 9W Tol=5%
1 x Draht-Widerstand 56R 11W Tol=5%
1 x Speakon Einbaubuchse 2-pol NEUTRIK NL2MP
1 x Buchsengehaeuse 7-polig 2.5mm JST Typ XHP7
1 x BCD-to-Decimal Decoder PDIP-16 Type PC74HCT42P
1 x Transceiver/Register SOIC-24 Type 74F652SC
1 x FLUKE AC72 Krokodilklemmen Satz
1 x Sicherung flink 10A 250V 6.3x32mm Schurter
1 x 8-Bit Identity Comparator SOIC-20 Type SN74F521DW
1 x Wickelkondensator 470nF 50V 4.6x9.5x4.6mm RM=2.5mm
1 x 8-Channel Saturated Sink Driver PDIP-18 Type UDN2595A
1 x XLR Einbaubuchse Female 3-Pol ENOVA XL13FB-W
1 x 1.2V Low Voltage Reference TO-92 Type ICL8069CCZR
1 x 3-Phasen-Motor-Drehrichtungsanzeiger
1 x Batteriehalter Printmontage fuer 1x 23mm-Knopfzelle
1 x Wickelkondensator 22nF 630VDC 220VAC/50Hz 6.5x14.5x12.5mm RM=10.
1 x 4-Bit Synchronous Binary Counter PDIP-16 Type SN74F161AN
1 x Bandfilter Standardausfuehrung AM 455kHz Stufe=Oszillator
1 x Cinch-Einbaubuchse weiss
1 x Filterscheibe rot zu LED.FR25x93N
1 x Miniatur-Relais liegend 3V 1xEin/Ein 250VAC 8A OMRON G2L-1
1 x Elko radial 47uF 385V
1 x Draht-Widerstand 120R 9W Tol=5%
1 x Print-Stiftleiste Gerade 3-polig 2.5mm JST Typ B3B-XHA
1 x Draht-Widerstand 3k0 Ohm 225W
1 x Kantenschutz 3mm Profil P mit geschlossener Kante 1m
1 x PNP Germanium Transistor 5mA 12V TO-1 Type 2SA53
1 x Draht-Widerstand 0.68R 9W Tol=10%
1 x Dual 1-of-4 Decoder/Demultiplexer PDIP-16 Type HEF4555BP
1 x Viol-Platte doppelseitig 100x160x1.5mm/35um Epoxyd FR4
1 x Draht-Widerstand 10k 7W Tol=10% Vitrohm KH212-810B10K
1 x Kantenschutz 1mm Profil C mit gezahnter Kante 35m
1 x Triple Serial Adder PDIP-16 Typ 4038B
1 x Koffer-Service Set Elektronik Hirschmann PMS-SKS
1 x Kantenschutz 4mm Profil P mit geschlossener Kante 15m
1 x 9-Bit Parity Generator/Checker PDIP-14 Type SN74LS280N
1 x Relaissockel mit Schraubanschluessen 4xEin/Ein passend zu SRD.4U
1 x Subminiatur-Relais 24V 1xEin 1xAus 250VAC 8A OMRON G6C-2117P-US-
1 x Sicherung super flink 250mA 690V 10.3x38mm, RoHS
1 x RS-232 Transmitter/Receiver +5V RoHS DIP-16 Type HIN232CP
1 x Drehknopf gruen passend zu SBE.S
619.89CHF
Hersteller
Hersteller Info
andere Produkte
Sprachen
English Deutsch
Währungen