7.30CHF
ab 10 6.42CHF
ab 50 6.01CHF
ab 100 5.62CHF

NTE977 Positive 0.1A 5V Voltage Regulator TO-92

Bestell-Nr.:    NTE977


Verfügbarkeit:     PICTURE_ONLY_TWO
  Sofort lieferbar!


NTE977 Positive 0.1A 5V Voltage Regulator TO-92

Info als pdf File

Integrated Circuit 3 Terminal Positive Voltage Regulator, 5V, 100mA
TO-92

Description:

The NTE977 is a positive 3-terminal voltage regulator in a TO92 type package. With adequate heat sinking this device can deliver up to 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating.

When used as a zener diode/resistor combination replacement, this device usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. The NTE977 can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Typical applications include use in logic systems, instrumentation, Hi-Fi, and other solid state electronic equipment. Although designed primarliy as a fixed voltage regulator, this device can be used with external components to obtain adjustment voltages and currents.

Features:

  • Output Voltage Tolerances of ±5% over the Temperature Range
  • Output Current of 100mA
  • Internal Thermal Overload Protection
  • Internal Short-Circuit Current Limiting
  • Output Transistor Safe-Area Compensation
Absolute Maximum Ratings:
Input Voltage, VIN     30V
Internal Power Dissipation (Note 1), PD     Internally Limited
Operating Junction Temperature Range, Topr     0°C to +70°C
Maximum Junction Temperature, TJ     +125°C
Storage Temperature Range, Tstg     -55°C to +150°C
Lead Temperature (During soldering, 10sec., TL     +230°C

Note 1.Thermal resistance is typicall +60°C/W junction-to-case, +232°C/W junction-to-ambient, and +88°C/W junction-to-ambient at 400ft min of air. The maximum junction temperature shall not exceed +125°C on electrical parameters.

Electrical Characteristics: (VOUT = 5V, VIN = 10V, IO = 40mA, CIN = 0.33µF, COUT = 0.1µF, Note 2 unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Units
Output Voltage VO Note 4 TJ = +25°C 4.8 5.0 5.2 V
1mA </= IO </= 70mA, 7V </= VIN </= 20V 4.75 5.00 5.25 V
Line Regulation Regline TJ = +25°C 7V </= VIN </= 20V - 18 75 mV
8V </= VIN </= 20V - 10 54 mV
Load Regulation Regload TJ = +25°C 1mA </= IO </= 100mA - 20 60 mV
1mA </= IO </= 40mA - 5 30 mV
Quiescent Current IB TJ = +25°C - 3.0 5.0 mA
TJ = +125°C - - 4.7 mA
Quiescent Current Change IB With line, 8V </= VIN </= 20V - - 1.0 mA
With load, 1mA </= IO </= 40mA - - 0.1 mA
Output Noise Voltage VN TJ = +25°C, f = 10Hz to 10kHz, Note 3 - 40 - µV
Ripple Rejection RR 8V </= VIN </= 16V, f = 120Hz 47 62 - dB
Input Voltage Required to Maintain Line Regulation TCVO TJ = +25°C 7 - - V

Note 2.The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperatures as indicated at the initiation of the test.
Note 3.Recommended minimum load capacitance of 0.01µF to limit high frequency noise bandwidth.
Note 4.The temperature coefficient of VOUT is typically within ±0.01% VO/°C.



Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind. Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre

Anzahl:
Bewertungen

Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
Schnellsuche
1 x Thyristor im Metallgehaeuse mit Stud und Gewinde TO-48 Typ S6210
1 x Leistungs-Metallfilm-Widerstand 4.3k 3W Tol=5%
1 x Up/Down Decade Counter SOIC-16 Type 74F191SC
1 x X2-Kondensator 330n/275V 10% 7,0x16,0x26,5mm RM=22,5mm
1 x Torx-Sortiment
1 x Quad 2-Input OR Gate PDIP-14 Type PC74HCT32P
1 x Symbol TO-18 + TO-92 (250 Stk) 2.54mm 4pol 1:1
1 x Fuss Elastomer braun 20.5x20.5x7.6mm selbstklebend
1 x 9-Bit Parity Generator/Checker PDIP-14 Type SN74S280N
1 x Dual 4-Input NAND Gate PDIP-14 Type PC74HC20P
1 x NTE800 FM AM SSB IF Amp Det PDIP-14
1 x NPN Transistor 150mA 180V TO-39 Typ BD115
1 x Kabelbinder Polyamid natur 145x3.4mm
1 x Low Volt Quad 2-Input Multiplexer SOIC-16 Type 74LCX157M
1 x 4-Wide AND-OR-INVERT Gate PDIP-14 Type SN74LS54N
1 x SCSI-II Notebook Kabel 2m ICOC SII-D-2
1 x 8-Stage Bus Register 3-Stage PDIP-16 Type CD74HC4094E
1 x NTE877 IC Dual Low Power OP Amp 8-Pin Metal Can
1 x 100mA Negative Voltage Regulator TO-39 Type MC79L24AC
1 x NPN Transistor 500mA 80V TO-92 Type MPSA06
1 x NPN Transistor 100mA 300V TO-39 Type BF259
1 x Programmable Operational Amplifier PDIP-8 Type UA776TC
1 x NTE8224 Clock Generator and Driver PDIP-16
1 x Flachsteckzunge 2.8x0.8mm mit Befestigungsloch
1 x Draht-Widerstand 100 Ohm 100W
1 x Kantenschutz 4mm Profil C mit gezahnter Kante 1m
1 x Dual J-K Flip-Flop with Set and Reset PDIP-16 Type PC74HCT112P
1 x Leistungs-Metallfilm-Widerstand 6.8R 2W Tol=5%
1 x 3 to 8-Line Decoder/Demultiplexer PDIP-16 Type CD74AC138E
1 x Netzkabel H05VV-F Td 3x1mm2 LNPE schwarz
1 x Midi-Sicherung 50A Littelfuse L498 41x12mm
1 x NTE786 Special Purpose Amplifier - IF Amp FM Detector
1 x High-Performance Operational Amplifier TO-99 Type UA777CT
1 x Octal Buffer/Driver 3-State Outputs SOIC-20 Type SN74ABT244DW
1 x Leistungs-Metallfilm-Widerstand 180k 2W Tol=5%
1 x Keramikchip-Kondensator 10nF 100V 1206/X7R
1 x DDS Funktionsgenerator 100mHz - 150MHz mit LCD-Anzeige PeakTech
2069.29CHF
Hersteller
Hersteller Info
andere Produkte
Sprachen
English Deutsch
Währungen