NTE935 3-Terminal Positive Voltage Regulator 5A 1.2V-32V TO-3
TO-3
Info als pdf-File
Description:
The NTE935 is an adjustable 3 terminal positive voltage regulator in a TO3 type package capable of supplying in excess of 5A over a 1.2V to 32V output range.
A unique feature of the NTE935 is its time dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the regulator for short periods of time.
Also included on the chip are thermal overload protection and safe area protection for the power transistor.
Overload protection remains functional even if the adjustment pin is accidently disconnected.
Normally, no capacitors are needed inless the device is situated far from the input filter capacitors in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators.
Features:
- Guaranteed 7A Peak Output Current
- Guaranteed 5A Output Current
- Adjustable Output Down to 1.2V
- Line Regulation Typically 0.005%/V
- Load Regulation Typically 0.1%
- Guaranteed Thermal Regulation
- Output is Short Circuit Protected
- Current Limit Constant with Temperature
- Standard 3-Lead Transistor Package
Absolute Maximum Ratings:
Power Dissipation, PD |
|
Internally Limited |
Input-Output Voltage Differential, VI-O |
|
35V |
Operating Junction Temperature Range, TJ |
|
0° to +125°C |
Storage Temperature Range, Tstg |
|
-65°C to +150°C |
Typical Thermal Resistance, Junction-to-Case, RthJC |
|
1.0°C/W |
Typical Thermal Resistance, Junction-to-Ambient, RthJA |
|
35°C/W |
Lead Temperature (During Soldering, 10sec), TL |
|
+300°C |
Electrical Characteristics: (+25° </= TJ </= +150°C, VIN - VOUT = 5V, and IOUT = 2.5A, Note 1 unless otherwise specified)
Parameter |
Test Conditions |
Min |
Typ |
Max |
Units |
Line Regulation |
3V </= (VIN - VO) </= 35V, IL = 0.01A, Note 2 |
- |
0.02 |
0.06 |
%/V |
3V </= (VIN - VO) </= 35V, IL = 0.01A, TA = +25°C, Note 2 |
- |
0.005 |
0.03 |
%/V |
Load Regulation |
10mA </= IOUT </= 5A, Note 2 |
- |
0.3 |
1.0 |
% |
10mA </= IOUT </= 5A, TA = +25°C, Note 2 |
- |
0.1 |
0.5 |
% |
Thermal Regulation |
Pulse = 20ms, TJ = +25°C |
- |
0.002 |
0.02 |
%/W |
Adjustment Pin Current |
|
- |
45 |
100 |
µA |
Adjustment Pin Current Change |
10mA </= IL </= 5A, 3V </= (VIN - VOUT) </= 35V |
- |
0.2 |
5.0 |
µA |
Reference Voltage |
10mA </= IOUT </= 5A, 3V </= (VIN - VOUT) </= 35V, P </= 50W, Note 3 |
1.19 |
1.24 |
1.29 |
V |
Temperature Stability |
TMIN </= TJ </= TMAX |
- |
1 |
- |
% |
Minimum Load Current |
(VIN - VOUT) = 35V |
- |
3.5 |
10 |
mA |
Current Limit |
(VIN - VOUT) </= 10V |
5.0 |
8.0 |
- |
A |
(VIN - VOUT) </= 30V |
- |
1.0 |
- |
A |
RMS Output Noise, % of VOUT |
TJ = +25°C, 10Hz </= f </= 10kHz |
- |
0.003 |
- |
% |
Ripple Rejection Ratio |
VOUT = 10V, f = 120Hz |
- |
60 |
- |
dB |
CADJ = 10µF |
60 |
75 |
- |
dB |
Long Term Stability |
TJ = +125°C |
- |
0.3 |
1.0 |
% |
Note 1. | Power Dissipation is internally limited, these specifications are applicable for power dissipations up to 50W. |
Note 2. | Regulation is measured at constant junction temperature. Changes in output voltage due to heating effects are taken into account separately by thermal regulation. |
NTE-ECG replacement list as pdf-file
ECG/NTE Ersatzliste als pdf-File
Diagrams and Info of most NTE-ECG Components
Unser Halbleiter Katalog (ohne NTE-Sortiment)
NTE Sortiment (unser ganzes Sortiment)
Einzel-Halbleiter (ganzes Sortiment)
Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen?
Bitte hier melden
Suchen Sie nach einem Ersatztypen?
Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig
ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz
für Originaltypen verschiedenster Hersteller und Ursprünge für
fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen
Plastikbeuteln verpackt, auf welchen die wichtigsten Daten
vermerkt sind.