NTE789 Stereo Multiplex Decoder PDIP-16

Info als pdf File

Description:
The NTE789, a monolithic silicon integrated circuit, is a stereo multiplex decoder intended for FM multiplex systems.
This stereo multiplex decoder requires only one low-inductance tuning coil (requires only one adjustment for complete alignment), provides automatic stereo switching, energizes a stereo indicator lamp, and operates from a wide range of voltage supplies.
Figure 1 shows the block diagram for the NTE789. The input signal form the detector is amplified by a low-distortion preamplifier and simultaneously applied to both signal, generated by a local voltage-controlled oscillator (VCO), is counted down by two frequency dividers to a 38kHz signal and to two 19-kHz pilot-tone supplied by the FM detector is compared to the locally generated 19-kHz signal in a synchronous detector. The resultant signal controls the voltage controlled oscillator (VC)) so that it produces an output signal to phase-lock the stereo decoder with the pilot tone. A second sychronous detector compares the locally generated 19-kHz signal with the 19-kHz pilot tone. If the pilot tone exceeds and externally adjustable threshold voltage, a Schmitt trigger circuit is energized. The signal from the Schmitt trigger lights the stereo indicator, enables the 38-kHz synchronous detector, and automatically switches the NTE789 form monaural to stereo operation. The output signal from the 38-kHz detector and the composite signal from the preamplifier are applied to a matrixing circuit from which emerge the resultant left and right channel audio signals. These signals are applied to their respective left and right post amplifiers for amplification to a level sufficient to drive most audio amplifiers. The NTE789 utilizes the 16-lead quad-in-line plastic package and operates over the ambient temperature range of -40°C to +85°C.

Features:
- Requires the use of only one low-inductance tuning coil
- Automatic stereo switching
- Directly drives a stereo indicator lamp up to 100mA
- Includes driver for stereo-lamp indicator
- Operates from a wide range of power supplies: 10 to 16 volts
- Requires only one adjustment for alignment
- Switching from monaural to stereo and stereo to monaural produces no audible thumps
- Low distortion: under 0.5%
- Separate dc input permits stereo defeat or enable
- High signal output: directly drives audio amplifiers
- Excellent SCA (storecast) rejection: 55dB typ.
- High audio channel separation: 40dB typ.

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
DC Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16V
Current at Pin12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
Input Signal Voltage (Composite)(Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mV
Operating Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +85°C
Storage Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150°C
Lead Temperature (During Soldering, 1/32” (0.79mm) from case,10s max.) . . . . . . . . . . . . . . . . . . . . . +265°C

Note 1. For stereo operation, a minimum input signal voltage (composite) of 40mV is required.

Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind. Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre

NTE-ECG replacement list as pdf-file
Diagrams and Info of most NTE-ECG Components