49.00CHF
ab 3 47.54CHF
ab 5 46.56CHF
ab 10 44.60CHF

Level Indicator for Water Tanks (Module)

Bestell-Nr.:    BKM.M167N


Availability:     PICTURE_ONLY_TWO
  Ready for shipping!


Level Indicator for Water Tanks (Module)

Remote Sensing up to 100m
Battery-powered liquid level indicator for measuring the level of water in tanks such as rain water, sewage chambers or slurry tanks from a distance of up to 100 m. After touching the button, 10 LEDs display the level of the liquid in steps of 10% each LED (indication 10 - 100%). The device (approx. 131 x 78 x 36mm) is assembled at the wall of the tank and requires 2 batteries "AA". Connection is made via terminals inside the device. A normal signal cable (telephone cable, control wire or the like) with at least 11 cores is necessary to connect your water tank with the level indicator (cable is not included). A cable with less cores could be used, but then it will not be possible to use all indication steps (e.g. with 8 cores only 7 LED indication steps may be used, which is, however, often sufficient).

Extension in case of bigger measurements
This module is normally to be used for measuring water levels in rain containers, water containers, etc. Our clients have asked us if the module can be used to measure bigger containers like for example a dwell, where the separation of the measurement electrodes is of approx. 5m. Due to the big separation between the higher and the lower electrode in this kind of measurements (approx 40m), the intensity of the measurement display (LED´s) can become weak. In order to avoid this, we recommend installing the electrodes with a parallel long tube for all of the electrodes (see info as pdf file).

Operating voltage: 3V (2x AA batteries, not included)
Display: max 10 LEDs and 1 LED for the battery control
Measuring points in the water tank: 1 – 10, switchable
Current consumption during the measurement (button is pushed): max 120mA if all LEDs light up
Max cable length between the level indicator and water tank: 100m
Required cable to the water tank: telephone cable or similar cable with at least 11 cores
Measuring current at the water tank probe: approx 50μA per channel
Dimensions: approx 131 x 78 x 36mm
Info as pdf file
Make: Kemo
EAN 4024028031675

Our Kit Set + Modules Catalogue
Electronic Kits and Modules (our whole assortment) in Alphabetical Order
Electronic Kits and Modules (our whole assortment)
Table of Measurements of all our Boxes and Enclosures (sorted by size)

Pictures are a guide only actual product may vary. Subject to alterations and errors.
Help us to eliminate errors: Please report any errors here. Electronic Science Kits fun and educational electronic kits electronic kits and modules
Quantity:
Reviews

Customers who bought this product also purchased
Quick Find
1 x Vibration Switch as Alarm (Module)
1 x Dispenser Assortment End-Sleeves 4-16mm Un-Insulated Vogt 4461
1 x Quartz Crystal 2.097152MHz 32pF HC-18/U AT Cut
1 x Sound Level Calibrator 94dB or 114dB PeakTech P8010
1 x Tabbed Coin Cell 3V 285mAh 2-Pin PCB Vertical CR2430FV
1 x Heat Sink 100mm long Fischer=SK 68 100 SA
1 x NTE6403 IC Silicon Bilateral Switch SBS 1A TO-92 or TO-98
1 x Suppressor Diode 1500W/1ms 10V Unidirectional DC Type 1.5KE10A
1 x Acetate Foil Clear A4 210x297mm without Grid
1 x 2.54mm 90° Connector Strip Male 60-Pol with Standard Locking Le
1 x Power Supply Plug Angular Version 0.7x2.35mm RC-5320A JSAP1 Sold
1 x USB-Cable A-A Male/Male 3m Assmann AK 700-3
1 x Bipolar electrolytic capacitor 47uF 10% U=100VDC/35Veff 18x38mm
1 x Precision Metal Film Resistor Axial 392k-Ohm 0.6W Tol=1%
1 x Arbitrary Waveform Generator 1μHz to 160MHz PeakTech 4046
1 x Housing for Flat Receptacles 4.8x0.5mm and 4.8x0.8mm L=21mm Vogt
1 x Li-YCY Cable 3x0.34mm2 (7x0.254) 2A Shielded – Sold per Meter
1 x Solid Tantalum Chip Capacitor 33uF 16V Kemet T491C
1 x Aluminium Sheet 1.5mm W=100mm Price per 10mm Length
1 x Phono Adapter 6.35mm Mono Male -> 3.5mm Mono Female NTA-182C or
1 x Relay 12VDC 4PDT 250VAC 7A Finder 55.34.9.012.0040 or OMRON MY4
1 x Balanced Microphone Cable 0.5m NC3FXX-BAG to NC3MXX-BAG Black
1 x Stranded Wire LiY 2.5mm2 Red (Hook-Up Wire)
1 x NTE788 IF Stereo for FM Receiver PDIP-16
1 x Precision Metal Film Resistor Axial 31.6k-Ohm 0.6W Tol=1%
1 x NTE243 NPN Si-Transistor Darlington hFE=3000 4A 80V TO-3
1 x Overvoltage Protection 12VDC (Module)
1 x PCB Connector 11-Pol Female 8A 160V Screw Phoenix Contact
1 x DMM True RMS 1000V 10A AD/DC 4000 Counts PeakTech 2015A
1 x Signal Injector (Test Signal Generator) (Kit)
1 x NTE278 NPN Si-Transistor 400mA 20V Broadband RF Amp TO-39
1 x Miniature Light Bulb 6V 100mA (6.22x15.87mm) T1-3/4 MF (723MF)
1 x NTE25 PNP Si-Transistor General Purpose 1A 80V TO-237
1 x Strain Relief Bushing Black Suitable Round Cable up to 6.5mm
1 x Wall Enclosure 120 x 70 x 35mm with Mounting Flanges
1 x Carbon Trimmer 14mm horizontal 4.7M-Ohm 300mW
1 x Reed Contact 1xChangeover 0.3A 30VDC Profitec SAS4
1 x Spiral Audio Cable Stereo 3m with 1/8" TRS Plug + 1/8" TRS Jack
1 x Fuse Holder Solder Lugs for 5x20mm and 6.3x32mm Fuse-Links
1 x Heat Sink Assmann V4450 for TO-5 TO-39
1 x Precision Metal Film Resistor Axial 15.4k-Ohm 0.6W Tol=1%
1 x 2.54mm IDC Connector Female 14-Pol for Flat Band Cable DIN41651/
1 x NTE1574 IC TV 30-Channel Remote Control DIP-16 (ECG1574)
1 x Relay 110VAC 2-Pole DPDT 250VAC 10A Finder 60.12 (8-Pin)
1 x Electrolytic Capacitor 1000uF 63V Can-type 18x43mm with Lugs
1 x Drafting Tape Self-Adhesive 1.57mm Bishop 201-062-11
1 x NTE7096 Current Mode PWM Pulse Width Modulator PDIP-8
1 x 3-Pole Male Plug with Flush Lock-Ring IP40 Lumberg SV30
1 x Standoff M4 Female/Female-Thread L=25mm Hex Polyamide Black
1 x Neon Glow Lamp 110VAC E10 (10x25mm) Tube Bailey NE23110GC
1 x Balanced Microphone Cable 3m with 3p XLR F to 3p 1/4” TRS M
1 x Miniature Fuse 5x20mm Medium-Time-Lag M 4A 250VAC
1 x Speaker Cable 0.75m with 1/4" TRS Plug NP2C on Each Side
1 x Precision Metal Film Resistor Axial 25.5k-Ohm 0.6W Tol=1%
1 x Triple 3-Input Positive-AND Gate PDIP-14 Type SN74S11N
1 x Hexagon Nut PG9 Polystyrene Niedax 3420/09
1 x Measuring Accessories Set PeakTech 8200
1 x Bare Copper Hook-Up Wire 2mm Silver-Plated 20m-Coil
1 x FLUKE PM9081 Dual Banana Plug (male) to Female BNC Adapter
1 x Quad 2-to-1 Data Selector/Multiplexer PDIP-16 Type SN74LS258BN
1 x Lichtleiter Verteiler 2-fach mit Toslink-Kupplungen
1 x Suppressor Diode 1500W/1ms 20V Unidirectional DC Type 1.5KE20A
1 x 3mm Flashing-LED Red 9-12V 38mA 32mcd 625nm 2Hz RoHS L3-R3FF
1 x Polyester Film Capacitor Radial Epoxy 270nF 250VDC 160VAC/50Hz
2693.48CHF
Manufacturers
Manufacturer Info
Other products
Languages
English Deutsch
Currencies