NTE988 Positive 3-Terminal Voltage Regulator 6.2V 100mA TO-92

Integrated Circuit 3 Terminal Positive Voltage Regulator 6.2V, 100mA
TO-92
Info als pdf File

Description:

The NTE988 is a 3-terminal positive voltage regulator in a TO92 type package and employs internal current-limiting and thermal shutdown, making it essentially indestructible. If adequate heat sinking is provided, this device can deliver up to 100mA output current. The NTE988 is intended for use as a fixed voltage regulator in a wide range of applications including local (on-card) regulation for elimination or noise and distribution problems associated with single-point regulation. In addition, this device can be used with power pass elements to make a high current voltage regulator. When used as a zener diode/resistor combination replacement, the NTE988 offers an effective output impedance improvement of typically two orders of magnitude, along with lower quiescent current and lower noise.

Features:

• Output Current up to 100mA
• No External Components
• Internal Thermal Overload Protection
• Internal Short-Circuit Current Limiting
• Output Voltage Tolerances of ±5% over the Temperature Range

Absolute Maximum Ratings:

Input Voltage, VIN		35V
Internal Power Dissipation, PD		Internally Limited
Operating Junction Temperature Range, Topr		0°C to +125°C
Storage Temperature Range, Tstg		-55°C to +150°C
Lead Temperature (During soldering, 10sec., TL		+265°C

Electrical Characteristics: (V_OUT = 6.2V, V_IN = 12V, 0° </= T_J < +125°C, I_O = 40mA, C_IN = 0.33µF, C_OUT = 0.1µF, Note 1, unless otherwise specified)

Parameter	Symbol	Test Conditions		Min	Typ	Max	Units
Output Voltage	VO	TJ = +25°C		5.95	6.20	6.45	V
		1mA </= IO </= 70mA, 8.5V </= VIN </= 20V, PD </= 750mW		5.9	6.2	6.5	V
Line Regulation	Regline	TJ = +25°C	8.5V </= VIN </= 20V	-	65	175	mV
			9V </= VIN </= 20V	-	55	125	mV
Load Regulation	Regload	TJ = +25°C	1mA </= IO </= 100mA	-	13	80	mV
			1mA </= IO </= 40mA	-	6	40	mV
Quiescent Current	IB			-	2.0	5.5	mA
Quiescent Current Change	IB	With line, 8V </= VIN </= 20V		-	-	1.5	mA
		With load, 1mA </= IO </= 40mA		-	-	0.1	mA
Output Noise Voltage	VN	TA = +25°C, f = 10Hz to 10kHz		-	50	-	µV
Temperature Coefficient of VOUT	-	IOUT = 5mA		-	-0.75	-	mV/°C
Ripple Rejection	RR	TJ = +25°C, 10V </= VIN </= 20V, f = 120Hz		40	46	-	dB
Dropout Voltage Voltage	VDO	TJ = +25°C		-	1.7	-	V
Peak Output/Short Circuit Current	Ipk/IOS	TJ = +25°C		-	140	-	mA

Note 1.

The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperatures as indicated at the initiation of the test.

Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden