NTE977 Positive 0.1A 5V Voltage Regulator TO-92
Info als pdf File
Integrated Circuit
3 Terminal Positive Voltage Regulator, 5V, 100mA
TO-92
Description:
The NTE977 is a positive 3-terminal voltage regulator in a TO92 type package. With adequate heat sinking this device can deliver up to 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating.
When used as a zener diode/resistor combination replacement, this device usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. The NTE977 can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Typical applications include use in logic systems, instrumentation, Hi-Fi, and other solid state electronic equipment. Although designed primarliy as a fixed voltage regulator, this device can be used with external components to obtain adjustment voltages and currents.
Features:
- Output Voltage Tolerances of ±5% over the Temperature Range
- Output Current of 100mA
- Internal Thermal Overload Protection
- Internal Short-Circuit Current Limiting
- Output Transistor Safe-Area Compensation
Absolute Maximum Ratings:
| Input Voltage, VIN |
|
30V |
| Internal Power Dissipation (Note 1), PD |
|
Internally Limited |
| Operating Junction Temperature Range, Topr |
|
0°C to +70°C |
| Maximum Junction Temperature, TJ |
|
+125°C |
| Storage Temperature Range, Tstg |
|
-55°C to +150°C |
| Lead Temperature (During soldering, 10sec., TL |
|
+230°C |
| Note 1. | Thermal resistance is typicall +60°C/W junction-to-case, +232°C/W junction-to-ambient, and +88°C/W junction-to-ambient at 400ft min of air. The maximum junction temperature shall not exceed +125°C on electrical parameters. |
Electrical Characteristics: (VOUT = 5V, VIN = 10V, IO = 40mA, CIN = 0.33µF, COUT = 0.1µF, Note 2 unless otherwise specified)
| Parameter |
Symbol |
Test Conditions |
Min |
Typ |
Max |
Units |
| Output Voltage |
VO |
Note 4 |
TJ = +25°C |
4.8 |
5.0 |
5.2 |
V |
| 1mA </= IO </= 70mA, 7V </= VIN </= 20V |
4.75 |
5.00 |
5.25 |
V |
| Line Regulation |
Regline |
TJ = +25°C |
7V </= VIN </= 20V |
- |
18 |
75 |
mV |
| 8V </= VIN </= 20V |
- |
10 |
54 |
mV |
| Load Regulation |
Regload |
TJ = +25°C |
1mA </= IO </= 100mA |
- |
20 |
60 |
mV |
| 1mA </= IO </= 40mA |
- |
5 |
30 |
mV |
| Quiescent Current |
IB |
TJ = +25°C |
- |
3.0 |
5.0 |
mA |
| TJ = +125°C |
- |
- |
4.7 |
mA |
| Quiescent Current Change |
IB |
With line, 8V </= VIN </= 20V |
- |
- |
1.0 |
mA |
| With load, 1mA </= IO </= 40mA |
- |
- |
0.1 |
mA |
| Output Noise Voltage |
VN |
TJ = +25°C, f = 10Hz to 10kHz, Note 3 |
- |
40 |
- |
µV |
| Ripple Rejection |
RR |
8V </= VIN </= 16V, f = 120Hz |
47 |
62 |
- |
dB |
| Input Voltage Required to Maintain Line Regulation |
TCVO |
TJ = +25°C |
7 |
- |
- |
V |
| Note 2. | The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperatures as indicated at the initiation of the test. |
| Note 3. | Recommended minimum load capacitance of 0.01µF to limit high frequency noise bandwidth. |
| Note 4. | The temperature coefficient of VOUT is typically within ±0.01% VO/°C. |
Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen?
Bitte hier melden
Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment
Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig
ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz
für Originaltypen verschiedenster Hersteller und Ursprünge für
fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen
Plastikbeuteln verpackt, auf welchen die wichtigsten Daten
vermerkt sind.
Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre
