NTE980 CMOS Micropower PLL Phase-Locked Loop PDIP-16

Integrated Circuit CMOS, Micropower Phase-Locked Loop (PLL)
16-PIN DIP
Info als pdf File

Description:

The NTE980 CMOS Micropower Phase;Locked Loop (PLL) consists of a low-power, linear voltage controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input in a 16-Lead DIP type package. A 5.2V zener diode is provided for supply regulation if necessary.

Features:

• Very Low Power Consumption:  70µW (Typ) @ VCO f_o = 10kHz, V_DD = 5V
• Operating Frequency Range up to 1.4MHz (Typ) @ V_DD = 10V, R_I = 5k Ohm
• Low Frequency Drift:  0.04%/°C (Typ) @ V_DD = 10V
• Choice of Two Phase Comparators:
              Exclusive-OR Network (I)
              Edge-Controlled Memory Network w/Phase-Pulse Output for Lock Indication (II)
• High VCO Linearity:  < 1% (Typ) @ V_DD = 10V
• VCO Inhibit Control for ON/OFF Keying and Ultra-Low Standby Power Consumption
• Source-Follower Output for VCO Control Input (Demod Output)
• Zener Diode to Assist Supply Regulation
• Standardized, Symmetrical Output Characteristics
• 100% Tested for Quiescent Current at 20V
• 5V, 10V and 15V Parametric Ratings

Applications:

FM Demodulator and Modulator Frequency Synthesis and Multiplication Frequency Discriminator Signal Conditioning

FSK - Modems Data Synchronization Voltage-to-Frequency Conversion Tone Decoding

Absolute Maximum Ratings:

DC Supply Voltage Range (Voltages referenced to VSS pin), VDD		-0.5 to +20V
Input Voltage Range, All Inputs		-0.5 to VDD+0.5V
DC Input Current, Any One Input		±10mA
Power Dissipation (TA = -40° to +60°C), PD		500mW
Derate Linearly to 200mW (TA = -40° to +60°C)		12mW/°C
Device Dissipation Per Output Transistor (TA = -40° to +85°C)		100mW
Operating Temperature Range, TA		-40° to +85°C
Storage Temperature Range, Tstg		-65° to +150°C
Lead Temperature (During Soldering, 1/16" ±1/32" from case, 10sec Max), TL		+265°C

Recommended Operating Conditions: (T_A = -40° to +85°C unless otherwise specified)

Parameter		Min	Typ	Max	Units
Supply Voltage Range VCO Section	As Fixed Oscillator	3	-	18	V
	Phase-Lock-Loop Operation	5	-	18	V
Supply Voltage Range Phase Comparator Section	Comparators	3	-	18	V
	VCO Operation	5	-	18	V

Static Electrical Characteristics: (T_A = +25°C unless otherwise specified)

Parameter		Symbol	Test Conditions			Min	Typ	Max	Units
			VO	VIN	VDD
VCO Section
Output Low (Sink) Current		IOLmin	400mV	0V, 5V	5V	0.51	1.0	-	mA
			500mV	0V, 10V	10V	1.3	2.6	-	mA
			1.5V	0V, 15V	15V	3.4	6.8	-	mA
Output High (Source) Current		IOHmin	4.6V	0V, 5V	5V	-0.51	-1.0	-	mA
			2.5V	0V, 5V	5V	-1.6	-3.2	-	mA
			9.5V	0V, 10V	10V	-1.3	-2.6	-	mA
			13.5V	0V, 15V	15V	-3.4	-6.8	-	mA
Output Voltage, Low Level		VOLmax	Pin4 driving CMOS e.g. Pin3	0V, 5V	5V	-	0	0.05	V
				0V, 10V	10V	-	0	0.05	V
				0V, 15V	15V	-	0	0.05	V
Output Voltage, High Level		VOHmax		0V, 5V	5V	4.95	5.0	-	V
				0V, 10V	10V	9.95	10.0	-	V
				0V, 15V	15V	14.95	15.0	-	V
Input Current		IINmax	-	0V, 18V	18V	-	±10-5	±0.1	µA
Phase Comparator Section
Total Device Current Current	Pin14 = Open, Pin5 = VDD	IDDmax	-	0V, 5V	5V	-	0.1	0.2	mA
			-	0V, 10V	10V	-	0.5	1.0	mA
			-	0V, 15V	15V	-	0.75	1.5	mA
			-	0V, 20V	20V	-	2.0	4.0	mA
	Pin14 = VSS or VDD, Pin5 = VDD		-	0V, 5V	5V	-	10.0	20.0	µA
			-	0V, 10V	10V	-	20.0	40.0	µA
			-	0V, 15V	15V	-	40.0	80.0	µA
			-	0V, 20V	20V	-	80.0	160.0	µA
Output Low (Sink) Current		IOLmin	400mV	0V, 5V	5V	0.51	1.0	-	mA
			500mV	0V, 10V	10V	1.3	2.6	-	mA
			1.5V	0V, 15V	15V	3.4	6.8	-	mA
Output High (Source) Current		IOHmin	4.6V	0V, 5V	5V	-0.51	-1.0	-	mA
			2.5V	0V, 5V	5V	-1.6	-3.2	-	mA
			9.5V	0V, 10V	10V	-1.3	-2.6	-	mA
			13.5V	0V, 15V	15V	-3.4	-6.8	-	mA
DC Coupled Signal Input       and Comparator Input       Voltage Sensitivity	Low Level	VILmax	0.5V, 4.5V	-	5V	-	-	1.5	V
			1V, 9V	-	10V	-	-	3.0	V
			1.5V, 13.5V	-	15V	-	-	4.0	V
	High Level	VIHmax	0.5V, 4.5V	-	5V	3.5	-	-	V
			1V, 9V	-	10V	7.0	-	-	V
			1.5V, 13.5V	-	15V	11.0	-	-	V
Input Current (Except Pin14)		IINmax	-	0V, 18V	18V	-	±10-5	±0.1	µA
3-State leakage Current		IOUTmax	0V, 18V	0V, 18V	18V	-	±10-5	±0.1	µA

Electrical Characteristics: (T_A = +25°C unless otherwise specified)

Parameter		Symbol	Test Conditions			Min	Typ	Max	Units
					VDD
VCO Section
Operating Power Dissipation		PD	fo = 10kHz, R2 = Infinity	R1 = 1M Ohm, VCOIN = VDD/2	5V	-	70	140	µW
					10V	-	800	1600	µW
					15V	-	3000	6000	µW
Maximum Operating Frequency		fmax	C1 = 50pF, R2 = Infinity, VCOIN = VDD	R1 = 1k Ohm	5V	0.3	0.6	-	MHz
					10V	0.6	1.2	-	MHz
					15V	0.8	1.6	-	MHz
				R1 = 5k Ohm	5V	0.5	0.8	-	MHz
					10V	1.0	1.4	-	MHz
					15V	1.4	2.4	-	MHz
Temperature-Frequency       Stability	No Frequency Offset				5V	-	±0.12	-	% / °C
					10V	-	±0.04	-	% / °C
					15V	-	±0.015	-	% / °C
	Frequency Offset				5V	-	±0.09	-	% / °C
					10V	-	±0.07	-	% / °C
					15V	-	±0.03	-	% / °C
Output Duty Cycle					5, 10, 15V	-	50	-	%
Output Transition Times		tTHL, tTLH			5V	-	100	200	ns
					10V	-	50	100	ns
					15V	-	40	80	ns
Source-Follower Output       (Demodulated Output)       Offset Voltage		VCOIN-VDEM	RS > 10k Ohm		5V	-	1.8	2.5	V
					10V	-	1.8	2.5	V
					15V	-	1.8	2.5	V
Linearity			VCOIN = 2.5V ±0.3V	RS = 100k Ohm	5V	-	0.3	-	%
			VCOIN = 5.0V ±2.5V	RS = 300k Ohm	10V	-	0.7	-	%
			VCOIN = 7.5V ±5.0V	RS = 500k Ohm	15V	-	0.9	-	%
Zener Diode Voltage		VZ	IZ = 50µA		-	4.45	5.50	6.15	V
Zener Dynamic Resistance		RZ	IZ = 1mA		-	-	40	-	Ohm
Phase Comparator Section
Pin14 (Signal In) Input Resistance		R14			5V	1.0	2.0	-	M Ohm
					10V	0.2	0.4	-	M Ohm
					15V	0.1	0.2	-	M Ohm
AC Coupled Signal Input    Voltage Sensitivity    (Peak-to-Peak)			fIN = 100kHz, Sine Wave, Note 1		5V	-	180	360	mV
					10V	-	330	660	mV
					15V	-	900	1800	mV
Propagation Delay Time    (Pin14 to Pin13)	High to Low Level	tPHL			5V	-	225	450	ns
					10V	-	100	200	ns
					15V	-	65	130	ns
	Low to High Level	tPLH			5V	-	350	700	ns
					10V	-	150	300	ns
					15V	-	100	200	ns
3-State Propagation    Delay Time (Pin14 to Pin13)	High Level to Low Impedance	tPHZ			5V	-	225	450	ns
					10V	-	100	200	ns
					15V	-	95	190	ns
	Low Level to High Impedance	tPLZ			5V	-	285	570	ns
					10V	-	130	260	ns
					15V	-	95	190	ns
Input Rise or Fall Times	Comparator Input (Pin3)	tr, tf			5V	-	-	50	µs
					10V	-	-	1.0	µs
					15V	-	-	0.3	µs
	Signal Input (Pin14)				5V	-	-	500	µs
					10V	-	-	20	µs
					15V	-	-	2.5	µs
Output Transition Times		tTHL, tTLH			5V	-	100	200	ns
					10V	-	50	100	ns
					15V	-	40	80	ns

Note 1.

For sine wave, the frequency must be greater than 10kHz for Phase Comparator II.

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind.

Falls Sie einen Halbleiter suchen, können Sie entweder die NTE QuickCross Software bei uns als CD kaufen (Best.Nr. 08.NTE.CD) oder sie gratis vom Internet runterladen.