NTE928M Low Power Dual Operational Amplifier PDIP-8
Info als pdf File
To order >>> NTE928SM (8-SOIC)
Description:
Utilizing the circuit designs perfected for recently introduced Quad Operational Amplifiers, the NTE928M/NTE928SM dual operational amplifier features low power drain, a common mode input voltage range extending to ground/V
EE, and Single Supply or Split Supply Operation.
This amplifier has several distinct advantages over standard operational amplifier types in single supply applications. It can operate at supply voltages as low as 3V or as high as 32V with quiescent currents about one-fifth of those associated with the NTE941 (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing power supply voltage.
Features:
- Short Circuit Protected Outputs
- True Differential Input Stage
- Single Supply Operation: 3V to 32V
- Low Input Bias Current
- Internally Compensated
- Common Mode Range Extends to Negative Supply
- Single and Split Supply Operation
Absolute Maximum Ratings:
Power Supply Voltage (Single Supply), VCC |
|
32V |
Power Supply Voltage (Split Supplies), VCC, VEE |
|
±16V |
Input Differential Voltage Range (Note 1), VIDR |
|
±32V |
Input Common Mode Voltage Range (Note 2), VICR |
|
-0.3 to +32V |
Input Forward Current (VI -0.3V, Note 3), IIF |
|
50mA |
Output Short Circuit Duration, tS |
|
Continuous |
Junction Temperature Range, TJ |
|
-55°C to +125°C |
Operating Ambient Temperature Range, TA |
|
0°C to +70°C |
Note 1. | Split power supplies. |
Note 2. | For supply voltages less than 32V, the absolute maximum input voltage is equal to the supply voltage. |
Note 3. | This input current will only exist when the voltage is negative at any of the input leads. Normal output states will reestablish when the input voltage returns to a voltage greater than 0.3V. |
Electrical Characteristics: (VCC = 5V, VEE = GND, TA = +25°C, unless otherwise specified)
Parameter |
Symbol |
Test Conditions |
Min |
Typ |
Max |
Units |
Input Offset Voltage |
VIO |
VCC = 5V to 30V, VIC = 0 to VCC-1.7V, VO = 1.4V, RS = 0 Ohm |
|
- |
2.0 |
7.0 |
mV |
0° </= TA </= +70°C |
- |
- |
9.0 |
mV |
Average Temperature Coefficient
of Input Offset Voltage |
VIO/T |
0° </= TA </= +70°C |
- |
7.0 |
- |
µV/°C |
Input Offset Current |
IIO |
|
- |
5 |
50 |
nA |
0° </= TA </= +70°C |
- |
- |
150 |
nA |
Average Temperature Coefficient
of Input Offset Current |
IIO/T |
0° </= TA </= +70°C |
- |
10 |
- |
pA/°C |
Input Bias Current |
IIB |
|
- |
-45 |
-250 |
nA |
0° </= TA </= +70°C |
- |
-50 |
-500 |
nA |
Input Common-Mode Voltage Range |
VICR |
VCC = 30V, Note 4 |
|
0 |
- |
28.3 |
V |
0° </= TA </= +70°C |
0 |
- |
28.0 |
V |
Differential Input Voltage Range |
VIDR |
|
- |
- |
VCC |
V |
Large Signal Open-Loop
Voltage Gain |
AVOL |
RL = 2kOhm, VCC = 15V, For Large VO Swing |
|
25 |
100 |
- |
V/mV |
0° </= TA </= +70°C |
15 |
- |
- |
V/mV |
Channel Separation |
- |
1kHz </= f </= 20kHz, Input Referenced |
- |
-120 |
- |
dB |
Common-Mode Rejection Ratio |
CMRR |
RS </= 10kOhm |
65 |
70 |
- |
dB |
Power Supply Rejection Ratio |
PSRR |
|
65 |
100 |
- |
dB |
Output Voltage Range |
VOR |
RL </= 2kOhm |
0 |
- |
3.3 |
V |
Output Voltage - High Limit |
VOH |
VCC = 30V, 0° </= TA </= +70°C |
RL = 2kOhm |
26 |
- |
- |
V |
RL = 10k Ohm |
27 |
28 |
- |
V |
Output Voltage - Low Limit |
VOL |
VCC = 5V, RL = 10kOhm, 0° </= TA </= +70°C |
- |
5 |
20 |
mV |
Output Source Current |
IO+ |
VID = +1V, VCC = 15V |
20 |
40 |
- |
mA |
Output Sink Current |
IO- |
VID = -1V, VCC = 15V |
10 |
20 |
- |
mA |
VID = -1V, VO = 200mV |
12 |
50 |
- |
µA |
Output Short-Circuit to GND |
Ios |
Note 5 |
- |
40 |
60 |
mA |
Power Supply Current |
ICC |
VO = 0, RL = Infinity, 0° </= TA </= +70°C |
VCC = 30V |
- |
1.5 |
3.0 |
mA |
VCC = 5V |
- |
0.7 |
1.2 |
mA |
Note 4. | The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is VCC-1.7V, but either or both inputs can go to +32V without damage. |
Note 5. | Short circuit from the output to VCC can cause excessive heating and eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers. |
Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen?
Bitte hier melden
Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment
Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig
ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz
für Originaltypen verschiedenster Hersteller und Ursprünge für
fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen
Plastikbeuteln verpackt, auf welchen die wichtigsten Daten
vermerkt sind.
Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre