103.20CHF
ab 10 95.94CHF
ab 50 91.23CHF
ab 100 86.85CHF

NTE864 Precision Waveform Generator PDIP-14

Bestell-Nr.:    NTE864


Availability:     PICTURE_ONLY_ZERO
  on request !


NTE864 Precision Waveform Generator PDIP-14

Info as pdf-file

Description:

The NTE864 is a precision waveform generator in a 14-Lead DIP type package capable of producing sine, square, triangle, sawtooth, and pulse waveforms. Its operating frequency can be selected over eight decades of frequency, from 0.001Hz to 200kHz. The frequency of oscillation is highly stable over a wide range of temperature and supply voltage changes. Both full frequency sweeping as well as smaller frequency variations (FM) can be accomplished with an external control voltage. Each of the three basic waveforms, i.e., sinewave, triangle, and square wave outputs are available simultaneously, from independent output terminals.

Applications:

  • Precision Waveform Generaztion: Sine, Triangle, Square, Pulse
  • Sweep and FM Generation
  • Tone Generation
  • Instrumentation and Test Equipment Design
  • Precision PLL Design
Absolute Maximum Ratings:
Power Supply Voltage, VCC     36V
Power Dissipation, PD     625mW
            Derate Above +25°C     5mW/°C
Storage Temperature Range, Tstg     -65° to +150°C

Electrical Characteristics: (TA = +25°C, VS = ±5V to ±15V, RL = 1M Ohm, RA = RB = 10k Ohm, C1 = 3300pF, S1 Closed unless otherwise specified)

Parameter Test Conditions Min Typ Max Unit
Supply Voltage Single Supply   10 - 30 V
Dual Supplies ±5 - ±15 V
Supply Current VS = ±10V, Note 1 - 12 15 mA
Frequency Characteristics (Measured at Pin9)
Range of Adjustment Max. Operating Frequency RA = RB = 1.5k Ohm, C1 = 680pF, RL = 10k Ohm 200 - - kHz
Lowest Practical Frequency RA = RB = 1M Ohm, C1 = 500µF, (Low Leakage Cap) - 0.001 - Hz
Max. Sweep Frequency of FM Input   - 100 - kHz
FM Sweep Range S1 Open, Note 2, Note 3 - 1000:1 -  
FM Linearity 10:1 Ratio S1 Open, Note 3 - 0.1 - %
Range of Timing Resistors Values of RA and RB 0.5 - 1000 k Ohm
Temperature Stability   - 50 100 ppm / °C
Power Supply Stability Note 4 - 0.05 - % / V
Output Characteristics
Square Wave (Pin9) Amplitude (Peak-to-Peak) RL = 100k Ohm 0.90 0.98 - x VSPLY
Saturation Voltage ISINK = 2mA - 0.2 0.4 V
Rise Time RL = 4.7k Ohm - 100 - ns
Fall Time RL = 4.7k Ohm - 40 - ns
Duty Cycle Adjust   2 - 98 %
Triangle / Sawtooth / Ramp (Pin3) Amplitude (Peak-to-Peak) RL = 100k Ohm 0.30 0.33 - x VSPLY
Linearity   - 0.05 - %
Output Impedance IOUT = 5mA - 200 - Ohm
Sine-Wave Distortion Amplitude (Peak-to-Peak) RL = 100k Ohm 0.20 0.22 - x VSPLY
Unadjusted RL = 1M Ohm, Note 5, Note 6 - 0.7 1.5 %
Adjusted - 0.5 - %

Note 1.Currents through RA and RB not included.
Note 2.VSUPPLY = 20V.
Note 3.Apply sweep voltage at Pin8. VCC - (1/3 VSUPPLY -2) </= VPIN8 </= VCC, VSUPPLY = Total Supply Voltage across the IC.
Note 4.10V </= VS 30V or ±5V </= VS </= ±15V.
Note 5.82k Ohm resistor connected between Pin11 and Pin12.
Note 6.Triangle duty cycle set at 50%, use RA and RB.
Note 7.As RL is decreased, distortion will increase, RL min is equivalent to 50k Ohm.

System Description:

The NTE864 precision waveform generator produces highly stable and sweepable square, triangle, and sine waves across eight frequency decades. The device time base employs resistors and a capacitor for frequency and duty cycle determination. The generator contains dual comparators, a flip-flop driving swith, current sources, buffers, and a sine wave converter. Three identical frequency waveforms are simultaneously available. Supply voltage can range from 10V to 30V, or ±5V to ±15V with dual supplies.

Unadjusted sine wave distortion is typically less than 0.7% with Pin1 open and 82k Ohm from Pin12 to Pin11 (=V or GND). Sine wave distortion may be improved by including two 100k Ohm potentiometers between VCC and -V (or GND), with one wiper connecrted to Pin1 and the other connected to Pin12.

Small frequency deviation (FM) is accomplished by applying modulation voltage to Pin7 and Pin8; large frequency deviation (sweeping) is accomplished by applying voltage to Pin8 only. Sweep range is typically 1000:1.

The square wave output is an open collector transistor; output amplitude swing closely approaches the supply voltage. Triange output amplitude is typically 1/3 of the supply, and sine wave output reaches 0.22 of the supply voltage.



Pictures are a guide only actual product may vary. Subject to alterations and errors. Help us to eliminate errors:
Please report any errors here.



Are you searching for replacements of semiconductors? The following link brings you to the search window of NTE Electronics (a world wide supplier of high quality electronic components). This QUICKCross software can assist users in selecting the proper NTE replacement device.

QUICKCross Search Engine for NTE Replacement Semiconductors
Our Assortment of NTE- Replacement Devices

Note about NTE replacement devices (formerly ECG Philips and Sylvania):
NTE has one of the most extensive semiconductor lines in the industry. All NTE semiconductors are guaranteed to meet or exceed original specifications. Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre EEE

Quantity:
Reviews

Customers who bought this product also purchased
Quick Find
1 x 64-Bit RAM 3-State Outputs SOIC-16 Type 74F189SC
1 x Heat Sink 37.5mm long Assmann=V4432D Fischer=SK 04 37,5 CB SA
1 x Heat Sink Assmann=V5236B Fischer=FK 210 SA CB for SOT-32 TO-220
1 x Blade Fuse for Car 20A 32V Yellow ATO 20
1 x Standoff M3 Male/Female-Thread L=12mm Hex Steel
1 x Spacer Non-Threaded Round M5 L=30mm Grey Polycarbonate
1 x Portable Power Station Out:230VAC 12V 288Wh EcoFlow EFRiver
1 x 4-Digit Counter 7-Segment Driver PDIP-16 Type MM74C928N
1 x Digital Multimeter TRMS Beha-Amprobe AM-535-EUR
1 x Spacer Non-Threaded Round M3 L=11mm Grey Polycarbonate x100
1 x 1-of-16 Decoder Demultiplexer Input Latch PDIP-24 Type 4515B
1 x Spacer Non-Threaded Round M5 L=3mm Grey Polycarbonate
1 x 10mm Cermet Trimmer Horizontal-Mount 100k-Ohm 0.5W Tol=20% Type
1 x Spacer Non-Threaded Round M3 L=3mm Black Polystyrene
1 x FK-Inlineholder for Fuse Links up to 32V
1 x RS232 Cable 3m 1:1 D-SUB 25p Male/Female Assmann AK 166 3M
1 x Elapsed Hour Counter Surface Mount Graesslin taxxo 100 (UWZ 48A)
1 x 10mm Carbon Preset Trimmer Horizontal-Mount 2.2M-Ohm 0.1W Tol=20
1 x Blade Fuse for Car 3A 32V Purple ATO 3
1 x Blade Fuse for Car 1A 32V Black ATO 1
1 x Mica Wafer Muskovite for Transistor SOT-93 TO-3P Fischer GS3P
1 x Heat Sink 75mm long with 2x M4 Holes
1 x Standoff M3 Male/Female-Thread L=40mm Hex Steel
1 x Pico Fuse Axial Fast Acting 375mA 125V Littelfuse Series HF 251
1 x Flange Mount Adapter Finder 46 Series
1 x Relay 48VDC 3-Pole 3PDT 250VAC 10A Finder 60.13 (11-Pin)
1 x 2mm Jack/Probe-Connector Blue 6.3A 60VDC Schurter 0040.1164
1 x XLR Cable Connector Female 3-Pol ENOVA XL23FB-W
1 x 2mm Test Probe Square Panel Mounting Green Schurter 0040.1043
1 x Relay 12VDC DPDT 250VAC 10A Finder 55.32.9.012.0040 or OMRON MY2
1 x 2mm Jack/Probe-Connector Yellow 6.3A 60VDC Schurter 0040.1165
1 x Clip Tinned 6.3A 250VAC for Fuses 5x20mm Schurter 0751.0062
1 x Relay 12VDC 4PDT 250VAC 7A Finder 55.34.9.012.0040 or OMRON MY4
1 x 2mm Test Jack (Female) 3-Way PCB Mount Red Schurter 0040.1022
1 x 2mm Test Jack Blue 6.3A 60VDC Schurter 0040.1064
1 x Parallel Port Adapter D-SUB 25p Female/ RJ45 8P/8C Female
1 x 2mm Test Jack (Female) Horizontal PCB Black Schurter 0040.1101
1 x Mini Null Modem D-SUB 25p Female/D-SUB 25p Male Type IADAP 736-2
1 x Relay 230VAC 4PDT 250VAC 7A Finder 55.34.8.230.0040 or OMRON MY4
1 x Relay 6VAC 4PDT 250VAC 7A Finder 55.34.8.006.0040 or OMRON MY4
1 x Relay 24VDC DPDT 250VAC 10A Finder 55.32.9.024.0040 or OMRON MY2
883.03CHF
Manufacturers
Manufacturer Info
Other products
Languages
English Deutsch
Currencies