36.55CHF
ab 2 35.46CHF
ab 5 34.72CHF
ab 10 33.26CHF
ab 25 32.16CHF

Soil Humidity Sensor 12VDC (Module)

Bestell-Nr.:    BKM.M173


Availability:     PICTURE_ONLY_THREE
  Ready for shipping!


Soil Humidity Sensor 12VDC

This sensor switches your garden irrigation pump or the magnetic valve on when the soil is dry and switches off when there is enough humidity in the soil. The measuring head has to be buried into the ground at the depth where it has to measure and has to be connected with the basic device by cable. Approx. 2m of cable are included, the sensor cable may, however, be prolonged up to 20m with normal 2-pole cable. The device is operated by means of a commercial plug power supply (12VDC stabilized, > 130mA, jack plug 3.5mm). If the garden should be irrigated at certain times of the day or weekdays only, then please put a commercial timer before the plug power supply and program it accordingly. The soil humidity sensor starts to operate when it receives current from the power supply.

Operation sequence:
The soil humidity is measured after switching on the operating voltage. The connected pump is switched on for 18...30 minutes if the soil is too dry. If the soil is humid enough the device switches to „Pause“ for about 18 - 30 minutes and takes a new measurement after that. This continues as infinite loop until the operating voltage is switched off.

The basic device has to be mounted in a dry place.

Operating voltage: 12VDC stabilized > 130mA, 3.5mm jack
Display: 3 LEDs: On ... Off ... Pause
Switching contact: potential-free relay contact 1x On max 3A (up to 25V or 230VAC, see description)
Connectors: screw terminals
Time delays: approx 18 – 30 minutes between
Switching threshold: continuously, adjustable
Dimensions soil humidity sensor: approx 30 x 64mm plus 2 galvanized meta pins approx 4 x 40mm
Dimensions basic device: approx 72 x 50 x 28mm (without fastening straps)
Info as pdf file
Make: Kemo
EAN 4024028031736

Our Kit Set + Modules Catalogue
Electronic Kits and Modules (our whole assortment) in Alphabetical Order
Electronic Kits and Modules (our whole assortment)
Table of Measurements of all our Boxes and Enclosures (sorted by size)

Pictures are a guide only actual product may vary. Subject to alterations and errors.
Help us to eliminate errors: Please report any errors here. Electronic Science Kits fun and educational electronic kits electronic kits and modules
Quantity:
Reviews

Customers who bought this product also purchased
Quick Find
1 x Engine Transmission Unit 1 Revolution in 1 Hour
1 x Connector Centronics Series 57 Cable Female for Extension 14-Pol
1 x Parabolic Microphone (Kit)
1 x 4 Channel Computer Switch (Module)
1 x Ultrasonic Proximity Sensor (Module)
1 x Aluminium Enclosure Black with Aluminum Chassis 123x118x84mm Tek
1 x Loudspeaker Overload Protection (Kit)
1 x Phase Coupler for Power Line Products (Module)
1 x Engine Transmission Unit 1 Revolution in 2 Seconds
1 x Light Barrier 12VDC (Alarm Bell) (Kit)
1 x Infrared Spotlight (Kit)
1 x Connector Centronics Series 57 Cable Female 50-Pol for Ribbon Ca
1 x Aluminium Enclosure 145x86x37mm Black Lugs Teko TEKAL-22/E.29
1 x Polystyrene Enclosure Black Ventilated 178x128x54mm Teko KL-12
1 x Sensor Touch Switch (Kit)
1 x 2.54mm Square Pin Connector Right Angle Solder Tail Double Row 2
1 x Miniature Fuse 6.3x32mm Time-Lag T 32mA 250VAC Schurter FST
1 x Aluminium Profile Enclosure 60x100x100mm
1 x SCSI II Terminator Internal Active IDC50-Male Signle Ended
1 x Connector Centronics Series 57 Socket Female 50-Pol 90o Print Co
1 x ABS Enclosure 155x96x35mm Black Teko TN23.29
1 x Quartz Crystal 27.125MHz Series HC-36/U 3rd Overtone AT Cut
1 x Miniature Fuse 5x20mm Quick-Acting F 315mA 250VAC
1 x Miniature Fuse 6.3x32mm Quick-Acting F 250mA 250VAC Schurter FSF
1 x Low Cost Two Shell Enclosure Aluminium 50x100x300mm
1 x Signal Injector (Test Signal Generator) (Kit)
1 x Quartz Crystal 4.9152MHz 32pF HC-18/U AT Cut
1 x Jack Chassis Socket 6.35mm 2-P/Mono No Break Contact PCB Solder
1 x Infrared Light Barrier (digitally coded) 25m (Kit)
1 x Y-Adapter Splitter 3.5mm TRS Stereo Male Plug -> 2x RCA Female
1 x 8-Pin Socket DIN Rail/Surface Mounting Screw Terminals Finder
1 x Acoustical Warning Device/Alarm for Refrigerators (Kit)
1 x Flasher Slow 240VAC or 110VAC (Module)
1 x 2.54mm IDC Connector Female 20-Pol for Flat Band Cable DIN41651/
1 x Single Pole Telux Cam Switch 3 Positions SP3T 20A 500VAC M10-HE-
1 x Smoke Detector Philips DIY Kit EB7810
1 x ABS Enclosure Black with Alu Front Panel 160x95x49mm Teko
1 x 2.54mm Square Pin Connector Right Angle Solder Tail Single Row 1
1 x Two Shell Enclosure Aluminium Black/Silver 100x180x300mm
1 x ABS Enclosure Black 72x50x28mm
1 x Holding Element TH493501000 for TP4 (th4) and TP5 (th5)
1 x Special Antenna Amplifier 30 -850MHz (Kit)
1 x Strain Relief Bushing Black for Flat Cable 5x9mm SES-Sterling DM
1 x Electronic Signal Source Switcher Philips DIY Kit EB7415
1 x Engine Transmission Unit 1 Revolution in 30 Minutes
1 x Tactile Switch Key Top 12x12mm Blue B32-1340 Suitable OMRON B3F
1 x Miniature Fuse 5x20mm Quick-Acting F 1A 250VAC
1 x Replacement Sponge Weller 0052241999 for Weller Soldering Holde
1 x Racing Pack Charger (7.2V und 1700mA) (Module)
757.41CHF
Manufacturers
Manufacturer Info
Other products
Languages
English Deutsch
Currencies