| 1 x | BCD Up/Down Counter PDIP-16 Type PC74HC4510P |
| 1 x | Schaltnetzteil Out:48VDC 30W mit Schraubklemmen |
| 2 x | Gluehlampe 12V 2W (10x26mm) W2.1x9.5d Glassockel Osram 2820 |
| 1 x | Audio Adapter 3.5mm stereo--> 1x Cinch mono |
| 1 x | Print-Stecksockel fuer 2 Kontaktelement passend zu SAL.KE1 |
| 1 x | Kabelbuchse PowerCON 250VAC/16A IP65 NEUTRIK NAC3FX-W |
| 1 x | Ultraschall-Abstandswarner |
| 1 x | Montagesatz TO-3 |
| 1 x | Scart-Kupplung 21-pol Loetoesen |
| 1 x | NTE3097 Optoisolator Zero Crossing Triac Driver DIP-6 |
| 1 x | Filterscheibe rot zu LED.FR12x55N |
| 2 x | Netzkabel CH 3x1mm2 0.5m schwarz Typ 12/C13 |
| 1 x | Elko radial 470uF 10V 20% 8x11mm RM=3.5mm |
| 1 x | NTE9600 |
| 1 x | Keramikchip-Kondensator 33nF 50V 1206/X7R |
| 1 x | Mikrofon-Einbaustecker 8-pol abgeschirmt |
| 1 x | Filterscheibe gruen zu LED.FR25x81N |
| 1 x | Centronics Geraetedosen Loetkontakten 50-pol Delta Ribbon 57 |
| 1 x | Draht-Widerstand mit Abgriffschelle 27ohm 160W Tol=5% |
| 1 x | Multi LED 24VAC/DC (11x20mm) E10-14 mit 8 gruenen LED LD0806A24G |
| 1 x | ABS Pult-Gehaeuse 161x95x60mm grau Teko 115.5 |
| 1 x | Elko radial 1000uF 63V 18x43mm Teilkreis=16.5mm |
| 1 x | 2mm-Schaltpruefbuchse Printmontage gruen 6.3A 60VDC |
| 1 x | Beckmann- Handbuch der PA-Technik |
| 1 x | Gluehlampe 6V 5W (16x54mm) E14 Roehrenform |
| 1 x | FLUKE 80PK-25 Einstech-Messfuehler |
| 1 x | Telefonlampe 30V 30mA (4.6x22mm) T4.6 Bailey T4630020 |
| 1 x | Profil-Kuehlkoerper TO-3 SOT-9 TO-66 Fischer SK 08 50 CB SA |
| 1 x | Impulsuebertrager 1zu4 Prim=17R Sek=200R |
| 1 x | NiMH-Akku 1.2V 10'000mAh Ansmann D / UM1 / Mono |
| 1 x | Keramikchip-Kondensator 3.3nF 100V 0805/X7R |
| 1 x | Wickelkondensator 33nF 63V 2.5x7x7.2mm RM=5mm |
| 1 x | Gluehlampe 220-260V 7-10W (26x52mm) E14 Konische Form |
| 1 x | 5mm LED Gruen Diffus Typ HLMP-3507 |
| 2 x | 3mm LED gelb 2.25V 20mA 592nm 2200mcd typ. glasklar 35°, RoH |
| 1 x | Netzkabel Tdf 2x1mm2 3m schwarz Typ 2234/3234 |
| 1 x | L-Regler Mono 8-Ohm 100W |
| 1 x | Schalen-Gehaeuse Aluminium 60x180x150mm |
| 1 x | Binary Up/Down Counter PDIP-16 Type PC74HC4516P |
| 1 x | Kreuzgeschlitzte Membrantuellen Loch ø=20mm DGC-TPE 9 |
| 1 x | Wickelkondensator 2.2uF 100VDC 63VAC/50Hz 6.5x18.5x26mm RM=22.86 |
| 1 x | Centronics Printdose 90o gewinkelt Loetstift 50-p Delta Ribbon 5 |
| 1 x | Potentiometer 16mm linear ohne Schalter 10k 20%, RoHS |
| 1 x | Triple 3-Input NOR Gate PDIP-14 Type N74LS27N |
| 1 x | Kabelschuhe 4mm blank zum Pressen |
| 1 x | Gluehlampe 28V 40mA (5.7x16mm) T1-3/4 S5.7s Bailey MG06280401 |
| 1 x | 5mm 12V LED diffus rot 30mcd 60° mit Vorwiderstand Typ HLMP- |
| 1 x | Draht-Widerstand mit Abgriffschelle 15R 100W Tol=10% |
| 1 x | NTE21 PNP Si-Transistor 2A 32V SIL-3 ATR |
| 1 x | Wickelkondensator 5.6uF 100VDC 63VAC/50Hz 14x22x30mm RM=27.94mm |
| 1 x | Flexibles Solarmodul 27 Watt 12 Volt 3mm duenn 1.7kg, salzwasser |
| 1 x | Elko radial bipolar 220uF 16V 15.0x20mm RM=5.08mm |
| 1 x | Trimmkondensator 2pF-27pF 250VDC rot |
| 1 x | 3mm LED Gruen Diffus mit Chromfassung Typ SMZD-062, RoHS |
| 1 x | Quad 8-Bit Voltage-Output D/A Converter MDIP-20 Type DAC0854CIN |
| 1 x | Telefon-Adapter mit Saugnapf und Anschlusskabel |
| 1 x | 14-Stage Binary Ripple Counter PDIP-16 Type PC74HC4020P |
| 1 x | Kunststoff-Gehaeuse 178x128x36mm Teko-Serie KL |
| 2 x | Vorschaltgerät 18-24W 220-240VAC Osram Typ QT1x18-24/230-24 |
| 1 x | Gluehlampe 5V 20mA (2.4x4.75mm) T3/4 Wire Terminal |
| 1 x | Draht-Widerstand mit Abgriffschelle 33k 100W Tol=10% |
| 1 x | 18-gang Trimm-Potentiometer 10R 0.75W Tol=10% |
| 1 x | Abdeck-Rahmen schwarz Neutrik SCDP-0 passend zu D-Serie |
| 1 x | NTE315 NPN Si-Transistor 1A 50V Medium Power Amplifier SC-51 |
| 1 x | NTE920 Dual Toggle Flip-Flop w/Reset 8-Pin Can |
| 1 x | Wickelkondensator 10nF 100V 4.5x9.5x7.2mm RM=5mm |
| 1 x | Elko axial 10uF 350V 12.5x30mm RM=35mm |
| 1 x | Keramik-Kondensator 100pF 2% 500VDC 4x6.5mm RM=5mm, RoHS |
| 1 x | Trimmkondensator 4pF-20pF 250VDC gruen |
| 1 x | Klinken-Kabelstecker 3.5mm 2-pol mono Metall RoHS-konform |
| 1 x | NTE5191A Zener Diode 10W 15V DO-4 |
| 1 x | 2mm-Schaltpruefbuchse Printmontage rot 6.3A 60VDC |
| 1 x | 4-Bit Binary Full Adder with Fast Carry PDIP-16 Type PC74HC283P |
| 1 x | Kunststoff-Gehaeuse 198x178x72mm Teko-Serie AUS |
| 1 x | Longlife-Loetspitze 5.0mm Meisselform WELLER PT-D7 |
| 1 x | Li-Knopfzelle 3V 30mAh vertikal 2-Pin |
| 1 x | AC/DC-Labornetzgeraet 1-15V 5A PeakTech 6125 |
| 1 x | Dual Driver PDIP-8 |
| 1 x | USA-Einbausteckdose 2p+E schwarz 15A 125V Snap-In |
| 1 x | 3mm Standard LED Blau Typ LB3336-MQ |
| 1 x | NTE1453 IC Dual Channel Equalizer Amplifier DIP-14 |
| 1 x | Synchronous 4-Bit Counter PDIP-16 Type SN74LS163AN |
| 1 x | IDC-Buchsenleisten 2x 15-polig RM=2.0mm mit Zugentlastung, RoHS |
| 1 x | NTE39 PNP Si-Transistor Regulator TO-126 |
| 1 x | 3mm 5V LED Gruen Diffus mit Vorwiderstand 60° Typ HLMP-1640 |
| 1 x | Wickelkondensator 47nF 630VDC 220VAC/50Hz 7x16x17.5mm RM=15.24mm |
| 1 x | Telefonlampe 18V 25mA (5x30mm) T5.5 Steck Bailey T5518025 |
| 1 x | Kunststoff-Gehaeuse mit Griff 178/235x128/153x54mm Teko-Serie KL |
| 1 x | NTE9301 Dual 5-Input Power NAND Gate (Active Pull-Up) PDIP-16 |
| 1 x | Schrumpfschlauch schwarz 1m 12.7/6.4mm, RoHS |
| 1 x | Elko radial 4700uF 16V 20% 16x32mm RM=7.5mm |
| 1 x | Labor-Netzgeraet 1-36VDC 0-3A PeakTech 6135 |
| 2 x | Kaltgeraete-Chassisbuchse 2p+E schwarz EN60320 |
| 1 x | Sicherung traege 1.25A 250V 6.3x32mm |
| 1 x | NTE808 TV Video Signal Processor PDIP-16 |
| 1 x | Gluehlampe 220-260V 7-10W (16x48mm) E14 Roehrenform |
| 1 x | Glimmer-Isolierscheibe TO-3 |
| 1 x | Logik-TTL Digital UND NAND PDIP-16 Type SN49700N |
| 1 x | Potentiometer 23mm logarithmisch ohne Schalter 47k 20% |
| 1 x | Kabelbinder Polyamid schwarz 380x4.7mm temperaturbestaendig |
| 1 x | Gluehlampe 12V 30mA (5x20mm) T1-1/2 W2x4.6d Glassockel 2322 |
| 1 x | Unterputz-Montageset Edizio due 1x Chassisteckverbinder fuer D-S |
| 1 x | Gluehlampe 3.7V 300mA (9.5x24mm) E10 Linsenform OSRAM 3644 |
| 1 x | Durchfuehrungs-Tuelle Schwarz Innen Ø =2mm SES DK-TPE |
| 1 x | Schlitz-Schraubendreher nach VSM-Norm=0 B=2.5mm L=75mm |
| 1 x | Sicherung traege 125mA 250V 6.3x32mm ESKA |
| 1 x | Gluehlampe 24V 30mA (5x20mm) T1-1/2 W2x4.6d Glassockel 2342 |
| 2 x | Gluehlampe 230V 40W E14 Spotlight OSRAM Concentra 0922 |
| 1 x | Schrumpfschlauch gelb 6m Box 9.5/4.8mm, RoHS |
| 1 x | Keramikchip-Kondensator 680pF 100V 1206/NPO |
| 1 x | Netzkabel CH Td 3x1mm2 5m grau Typ 12/113 |
| 1 x | 6-Kant-Distanzbolzen Stahl L=10mm Bolzen/Gewinde M4 |
| 1 x | NTE1475 IC CMOS PLL Frequency Synthesizer DIP-20 |
| 1 x | NTE9382 |
| 1 x | Longlife-Loetspitze 3.2mm Meisselform WELLER PT-C7 |
| 1 x | Lackdraht blank 0.08mm 500m |
| 1 x | 6-Kant-Distanzbolzen Stahl L=12mm Bolzen/Gewinde M4 |
| 1 x | Schrumpfschlauch schwarz 12m Box 6.4/3.2mm RoHS |
| 1 x | Miniatur-Relais 12VAC 1xEin/Ein 250VAC 10A OMRON G2R-1-SN |
| 1 x | HiFi Hochton-Lautsprecher 8-Ohm 80/130W 97x23mm Monacor DT-107 |
| 1 x | Tantal-Chip 2.2uF 16V Bauform=A |
| 1 x | 10V Shunt Voltage Reference TO-92 Type LM4040BIZ-10.0 |
| 1 x | Keramikchip-Kondensator 330pF 100V 1206/NPO |
| 1 x | Mini-DIN-Kabelbuchse 7-pol |
| 1 x | Kainka- PC-Schnittstellen angewandt |
| 1 x | NTE1465 IC Aduio Power Amplifier 500mW SIP-9 |
| 1 x | Potentiometer 23mm logarithmisch ohne Schalter 10k 20% |
| 1 x | 4mm-Polklemme/Buchse gelb 6A 60VDC |
| 1 x | Keramikchip-Kondensator 470pF 100V 1206/NPO |
| 1 x | Quarz 9.830400MHz 32pF HC-18/U AT Grundwelle |
| 1 x | Draht-Widerstand mit Abgriffschelle 4.7k 100W Tol=10% |
| 1 x | Tropfentantal 68uF 16V RM=5.08mm Bauform=350K |
| 1 x | NTE81 Silicon NPN Transistor 0.5A 30V TO-78 |
| 1 x | Adjustable Voltage Reference TO-92 Type LM385Z |
| 1 x | Netzkabel CH Td 3x0.75mm2 3m grau Typ 12/113 90° |
| 1 x | Kondensator 1% axial 1.2nF 250VDC RM=15mm |
| 1 x | Sicherung traege 50mA 250V 6.3x32mm ESKA |
| 1 x | NTE4744 Unidirectional Transient Suppressor 85V MOV Varistor |
| 1 x | Profilmontage-Gehaeuse Aluminium 100x200x300mm |
| 1 x | Schaltnetzteil Output:12VDC 16W IP30, RoHS2 |
| 1 x | Schrumpfschlauch B-EX gelb 1m 6.4/3.2mm, RoHS |
| 1 x | Aussenkantenschutz 1.2mm mit geschlossener Kante 1m |
| 1 x | 3mm LED Infrared Typ TSUS3400 |
| 1 x | Lackdraht blank 0.04mm 1500m |
| 1 x | 5mm LED blau Kurzkopf 120mcd glasklar |
| 1 x | Draht-Widerstand 0.33R 1W Tol=10% |
| 1 x | Reihenklemme Stiftleiste 5.08mm 10-polig 12A 320V Combicon |
| 1 x | Tropfentantal 15uF 20V |
| 1 x | Batteriehalter KEYSTONE fuer 2/3A |
| 1 x | Rippen Modulgehaeuse ca. 67 x 65 x 37 mm |
| 1 x | Filterscheibe HIEFF-rot zu LED.FR12x55N |
| 1 x | D-Sub Print-Buchsenleiste gewinkelt 90 Grad 50-pol |
| 1 x | NTE9093 DTL Diode Transistor Logic Dual J-K Flip-Flop PDIP-14 |
| 1 x | Leistungs-Metallfilm-Widerstand 33k 2W Tol=5% |
| 1 x | Print Stiftleiste horizontal 60p RM=2.54mm DIN41651 |
| 1 x | Widerstand 1k 0.6W 25ppm 1% bei P0 |
| 1 x | LED 14mm Ziffernhoehe 200mVDC |
| 1 x | Quad 741 Operational Amplifier PDIP-14 Type LM349N |
| 1 x | Spiralschlauch 25m-Rolle fuer Kabelbuendel bis 20mm |
| 1 x | Labornetzgeraet 4CH 2x 0-30VDC 0-5A und 3-6,5VDC 3A und 8-15VDC |
| 1 x | Koaxial-Uebergangsadapter Female-Female |
| 1 x | Batterie 1.55V 21mAh Low Silberoxyd/muRata Hg-free |
| 1 x | Cinch-Printbuchse schwarz vergoldet horizontal |
| 1 x | Gluehlampe 220-260V 10-15W (22x48mm) E14 Konische Form |
| 1 x | 3mm LED Weiss 3.2-3.5V 9220mcd 6200mcd 50° RoHS |
| 1 x | NTE9909 |
| 1 x | IEC Antennenkupplung abgewinkelt vollgeschirmt |
| 1 x | NTE941 Operational Amplifier 8-Lead TO-5 |
| 1 x | Flechtschlauch Pliosil-PET 25, 2:1 25m schwarz Aufweitbereich 24 |
| 1 x | Netzgeraet IP66 12V/5A 60W |
| 1 x | 3mm Blink-LED Gruen 9-12V 38mA 20mcd 565nm 2Hz, RoHS Typ:TLBG4 |
| 1 x | 3mm LED Superbright weiss Type L3-W34N-BS |
| 1 x | Hex Current-Sensing PDIP-14 Type SN74LS63N |
| 1 x | Gluehlampe 220V 60W E27 Spotlight OSRAM Concentra 0916 |
| 1 x | 9-Bit Parity Generator/Checker PDIP-14 Type CD74ACT280E |
| 1 x | Dual CMOS Precision Operational Amplifier PDIP-8 Type LMC6062IN |
| 1 x | Spiralkabel Td H05VV-F 2.5m orange Typ12 > Typ13 |
| 1 x | Infrarot-Emitter 40° T-1 3/4 (5mm) 100mA 1.5V 600ns 500ns |
| 1 x | FLUKE i310s AC/DC Stromzange 30A/300A mit BNC Stecker |
| 1 x | Koaxialkabel RG62A/U 93-Ohm rot |
| 1 x | Wickelkondensator 150nF 630VDC 220VAC/50Hz 7.5x16.5x26mm RM=22.5 |
| 1 x | Tropfentantal 33uF 16V RM=2.54mm Bauform=350H |
| 1 x | NTE9321 |
| 1 x | Potentiometer 23mm linear ohne Schalter 10k 20% RoHS-konform |
| 1 x | Kaltgeraete-Stoerschutzfilter 6A |
| 1 x | U-Kuehlkoerper TO-220 |
| 1 x | Draht-Widerstand 270R 11W Tol=5% |
| 1 x | Tantal-Chip 22uF 25V Bauform=D |
| 1 x | Buchsen-Schraubklemmleiste weiss 2.5mm2 |
| 1 x | Knopfteil weiss Breite=12.3mm passend zu SBM.S |
| 1 x | Sicherung traege 400mA 250V 6.3x32mm ESKA |
| 1 x | Flechtschlauch Pliosil-PET 15, 2:1 10m schwarz Aufweitbereich 15 |
| 1 x | Montageschluessel |
| 1 x | Tantal-Chip 4.7uF 16V Bauform=B |
| 1 x | Leistungs-Metallfilm-Widerstand 68R 2W Tol=5% |
| 1 x | 3V Low-Volt R-to-R Amplifier PDIP-8 Type LMC6572BIN TLV2322 |
| 1 x | Spiralwolle Messing fuer WDC Ersatz (2Stueck) |
| 1 x | Labornetzgeraet 2x 0-30VDC 0-5A und 5VDC 3A fest |
| 1 x | NPN Darlington Transistor 20A 100V TO-3 Type 2N6284 |
| 1 x | Keramikchip-Kondensator 15nF 100V 1206/X7R |
| 1 x | Drehschalter 1-Pol 6-Rast mit Anschlag arretierbar ELMA Typ 01 |
| 1 x | 3mm LED Rot Typ TLHR4100 |
| 1 x | Reed-Relais 1xEin/Ein DIL/SIL 12V 0.5A Guenther 3573 1231 |
| 1 x | Print-Miniatur-Relais 50VAC 2xEin/Ein 250VAC 5A OMRON G2R-2 |
| 1 x | Glimmlampe 220V Fluorescent Rot (10x28mm) E10 Roehrenform |
| 1 x | NTE5671 Triac 20A 800V TO-220 |
| 1 x | Trimm-Potentiometer horizontal 47R 0.5W Tol=20% |
| 1 x | 4mm-Polklemme/Buchse blau 16A 60VDC |
| 1 x | Flechtschlauch Pliosil-PET 30, 2:1 25m schwarz Aufweitbereich 28 |
| 1 x | Reed-Relais 1xEin/Aus DIL 5V 100VAC 0.5A Guenther 3570 1301 |
| 1 x | Draht-Widerstand 0.39R 1W Tol=10% |
| 1 x | Wickelkondensator 2.7uF 100VDC 63VAC/50Hz 9x17x30mm RM=27.94mm |
| 1 x | Keramikchip-Kondensator 470pF 100V 0805/NPO |
| 1 x | 4mm Pruefspitze schwarz isoliert Hirschmann Pruef20 |
| 1 x | SCSI III > VHD CEN68HP Male/CEN68HP Male 1m |
| 1 x | 3mm 5V LED Gelb Diffus mit Vorwiderstand 60° Typ HLMP-1620 |
| 1 x | 3mm LED RGB 5000mcd |
| 1 x | Marderabwehr |
| 1 x | 3-St-Output Power Operational Amplifier PDIP-16 Type TLE2301NE |
| 1 x | Multi LED 24VDC (11x20mm) E10-14 mit 8 roten LED LD0806D24R |
| 1 x | Rahmen ohne Filter 25.4x43.2mm |
| 1 x | Gluehlampe 6V 1W (8.5x30mm) Flachsteck 6.3x0.8mm |
| 1 x | Potentiometer 16mm linear ohne Schalter 2.2M 20% |
| 1 x | Hi-Fi Tieftoener/Subwoofer 2x60/100W, 2x8-Ohm SPH-200TC |
| 1 x | Tropfentantal 330uF 3V |
| 1 x | 3V Low-Volt R-to-R Amplifier SOP-14 Type LMC6574BIM TLV2324 |
| 1 x | Tropfentantal 4.7uF 20V |
| 1 x | Planet IP-30 Industrieswitch 4x10/100 RJ45,2x100-FX SC |
| 1 x | Cinch-Kabelstecker schwarz Metall vergoldet 6mm-Kabelauslass |
| 1 x | Batterieklemme fuer Standard Batteriepole negativ 400A |
| 1 x | 5mm LED Gruen Klar Superhell Typ HLMP-3950 |
| 1 x | Telefonlampe 28V 40mA (5x30mm) T5.5 Stecksockel Bailey T5528040 |
| 1 x | Telefonlampe 28V 40mA (7x44mm) T6.8 Stecksockel Bailey T6828040 |
| 1 x | Durchfuehrungstuelle Schwarz Innen Ø =9mm SES DKF-TPE |
| 1 x | 3-1/2 Digit LCD/LED Display A/D Converter PDIP-40 Typ ICL7116CPL |
| 1 x | Symmytrisches Netzgeraet +/-15VDC 1.5A max.30V |
| 1 x | Y-Netzkabel Stecker C14 auf 2xC13, Laenge 0,3 + 2 x 0,5m |
| 1 x | 5mm LED rot Kurzkopf 150mcd glasklar 1,8V 20mA |
| 1 x | Draht-Widerstand in Alugehaeuse 0.39R 50W Tol=5% |
| 1 x | Kunststoff-Gehaeuse 215x130x79.4mm Schwarz Teko 154/P.9 |
| 1 x | Single Micropower Operational Amplifier PDIP-8 Type LMC6041IN |
| 1 x | Quad 2-Input NOR Gate SOIC-14 Type TC74ACT02FN |
| 1 x | Telefonlampe 12V 120mA (6.8x46.5mm) T6.8 Bailey T6812120 |
| 1 x | Leistungs-Metallfilm-Widerstand 1.1k 3W Tol=5% |
| 1 x | Gluehlampe 230V 15W (26x60mm) E14 Konische Form |
| 1 x | BCD to 7-Segment Decoder PDIP-16 Type MM74C48N |
| 1 x | Kabelbinder Polyamid schwarz 185x4.6mm temperaturbestaendig |
| 1 x | Print-Miniatur-Relais 230VAC 1U 16A 250VAC |
| 1 x | D-Sub Buchsenleiste mit Loetkelch 37-pol RoHS-konform |
| 1 x | Tropfentantal 22uF 25V |
| 1 x | Kantenschutz 4mm Profil C mit gezahnter Kante 1m |
| 1 x | 3mm 5V LED Rot Diffus mit Vorwiderstand 60° Typ HLMP-1600 |
| 1 x | Schrumpfschlauch blau 8m Box 4.8/2.4mm, RoHS |
| 1 x | 2-CH 8-Bit Analog Data Acquisition PDIP-16 Type ADC0851CIN |
| 1 x | Tropfentantal 100uF 3V |
| 1 x | Leitungssuchgeraet Sender+Empfaenger PeakTech 3435 |
 |
| 5820.57CHF |
