Digital RCD Tester PeakTech P2710

Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations.
The various selectable test currents and characteristics of the FI allow flexible use of this instrument. FI testers allow a fault current to flow and determine at which fault current the FI reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch.

3-digit LCD display with backlight
Normal (N) or Selective (S) -type RCD test
Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6
Safety: EN-61010-1; CAT III 600 V, IP40, double insulated housing
Accessories: Carrying case, Test leads, Batteries and User manual

Nominal test current: 10/30/100/500/1000mA
Current selection: 0.5x, 1x, 2x, 5x nominal current
Trip time: 10-2000ms at 0.5 x 10-500ms at 1x 10-150ms at 2x 10-40ms at 5x
Ramp test: 0.4 x to 1.4 times nominal rated current
Operation voltage: 6 x 1.5V AA (UM-3) batteries
Dimensions (WxHxD): 92 x 200 x 50mm
Weight: 700g
EAN-13: 4250569404672
RoHS compliant: yes
Info as pdf-file
Make: PeakTech
Type: P 2710 P2710

PeakTech Multimeter as html-file
FLUKE Series (our assortment) as html-file
For more Multimeter as html-file

For more PeakTech Insulation Tester
PeakTech (our whole assortment)
Measure and Display (our whole assortment)

Pictures are a guide only actual product may vary. Subject to alterations and errors.
Help us to eliminate errors: Please report any errors here.