6.45CHF 

NTE924M Voltage Follower Operational Amplifier PDIP-8

Bestell-Nr.:    NTE924M


Verfügbarkeit:     PICTURE_ONLY_ZERO
  auf Anfrage !


NTE924M IC Voltage Follower Operational Amplifier DIP-8

Formerly: ECG924M

Integrated Circuit Voltage Follower, Operational Amplifier
8-Lead DIP
Info als pdf-File

See also >>> NTE924 (8-P METAL CAN)


Description:

The NTE924 and NTE924M are monolithic operational amplifiers internally connected as unity-gain non-inverting amplifiers. These devices use super-gain transistors in the input stage to get low bias current without sacrificing speed. Directly interchangeable with the NTE909 and the NTE941 series in voltage follower applications, these devices have internal frequency compensation and provision for offset balancing.

Features:

  • Available in 8-Lead DIP (NTE924M) and 8-Lead Metal Can (NTE924) Packages
  • Input Current: 10nA Max Over Temperature
  • Small Signal Bandwidth: 20MHz
  • Slew Rate: 30V/µs
  • Supply Voltage Range: ±:5V to ±18V
Absolute Maximum Ratings:
Supply Voltage ±18V
Power Dissipation (Note 1), PD 500mW
Input Voltage (Note 2) ±15V
Output Short-Circuit Duration (Note 3) Indifinite
Operating Temperature Range, Topr 0° to +70°C
Storage Temperature Range, Tstg -65° to +150°C
Lead Temperature (During Soldering, 10sec), TL +260°C

Note 1.For operating at elevated temperatures, the NTE924 must be derated based on a thermal resistanced of +150°C/W, junction-to-ambient, or +45°C/W, junction-to-case. The thermal resistance of the NTE924M is +100°C/W, junction-to-ambient.
Note 2.For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Note 3.Contimuous short-circuit is allowed for case temperatures to +70°C or +55°C ambient temperature. It is necessary to insert a resistor greater than 2k Ohm in series with the input when the amplifier is driven from low impedance sources to prevent damage when the output is shorted. RS = 5k min, 14k typical is recommended for dynamic stability in all applications.

Electrical Characteristics: (±5V S A Parameter Test Conditions Min Typ Max Unit Input Offset Voltage TA = +25°C - 2.5 7.5 mV - - 10 mV Input Bias Current TA = +25°C - 2.0 7.0 nA - - 10 nA Input Resistance TA = +25°C 1010 1012 - Ohm Input Capacitance - 1.5 - pF Large Signal Voltage gain TA = +25°C, VS = ±15V, VOUT = ±10V, RL = 8k Ohm 0.999 0.9999 - V / V VS = ±15V, VOUT = ±10V, RL = 10k Ohm 0.999 - - V / V Output Resistance TA = +25°C - 0.75 2.5 Ohm Supply Current TA = +25°C - 3.9 5.5 mV Temperature Drift - 10 - µV / °'C Output Voltage Swing VS = ±15V, RL = 10k Ohm, Note 4 ±10 - - V Supply Voltage Rejection Ratio ±5V S 70 80 - dB

Note 4.Increased output swing under load can be obtained by connecting an external resistor between the booster and the V (-) terminal.



Dieser Artikel wird nicht mehr hergestellt.
Nur noch solange Vorrat.


NTE-ECG replacement list as pdf-file
ECG/NTE Ersatzliste als pdf-File
Diagrams and Info of most NTE-ECG Components

Unser Halbleiter Katalog (ohne NTE-Sortiment)
NTE Sortiment (unser ganzes Sortiment)
Einzel-Halbleiter (ganzes Sortiment)

Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind.

Anzahl:
Bewertungen

Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
Schnellsuche
0 Waren
Hersteller
Hersteller Info
andere Produkte