21.10CHF
ab 10 19.10CHF
ab 50 17.98CHF
ab 100 16.97CHF

NTE743 PLL Phase Lock Loop Stereo Decoder PDIP-16

Bestell-Nr.:    NTE743


Verfügbarkeit:     PICTURE_ONLY_TWO
  Sofort lieferbar!


NTE743 PLL Phase Lock Loop Stereo Decoder PDIP-16

Info als pdf File

Description:
The NTE743 requires only a single, non critical resistive tuning adjustment. This device derives left and right audio channels from the standard composite stereo decoder can also be used in a number of subscription TV decoder schemes or in various proposed TV stereo systems.
Using phase-lock techniques, the subcarrier (38 KHz for FM stereo) is regenerated in phase with and at exactly twice the frequency of the transmitted pilot signal. Switching between monaural and stereo operation is accomplished automatically by the presence of the pilot signal.
Low-impedance emitter-follower outputs and an internal voltage regulator for increased stability make the NTE743 suitable for both line-operated and automotive applications. It is designed to operate over a wide supply-voltage range and will function with supplies as low as 9V.

Features:
- Internal Temperature Compensation
- Single-Adjustment Tuning
- Automatic Stereo/Mono Switching
- Stereo Indicator Lamp Driver
- 70dB SCA Rejection
- Operating Voltage- 9 to 16V
- Low Harmonic Distortion

Absolute Maximum Ratings:
Supply Voltage, VCC
Continous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +16V
≤15s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +22V
Lamp Supply Voltage, VLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +22V
Lamp Current, ILAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA
Output Current, I4 or I5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670mW
Derate Above 70°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3mW/°C
Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65° to +150°C


Electrical Characteristics:
(TA = +25°C, VCC = 12V, Composite Input = 300mVrms (L = R, Pilot OFF), Pilot Level = 30mVrms, fm = 400Hz or 1kHz unless otherwise specified)
Parameter Test Conditions Min Typ Max Unit
Input Impedance Pin2 2 353 - k Ohm
Output Impedance Pin4 or Pin5 - 50 - Ohm
Audio Voltage Gain Desired Channel 0.7 1.0 1.4 V
Stereo Channel Separation fm = 100Hz - 30 - dB
fm = 400Hz 30 40 - dB
fm = 10kHz - 30 - dB
Monaural Channel Balance Pilot Level = 0V - 0.1 1.5 dB
Total Harmonic Distortion Multiplex Level = 600mV - 0.4 1.5 %
Ultrasonic Frequency Rejection 19kHz 25 35 - dB
38kHz 25 40 - dB
SCA Rejection 67kHz, Note 1 - 70 - dB
Stereo Switch Level Pilot Only, Lamp ON - 14 25 mVrms
Pilot Only, Lamp OFF 2.0 7.0 - mVrms
VCO Tuning Resistance Pin15, Note 2 20 23 26 k Ohm
VCO Frequency Drift -20° < TA < +25°C - ±0.5 ±2.0 %
+25° < TA < +70°C - ±0.5 ±2.0 %
Stereo Lamp Hysteresis Lamp OFF to Lamp ON 3.0 6.0 - dB
Capture Range Permissable Tuning Error - 4.0 - %
Output Voltage Shift Stereo to Mono Operation - ±30 - mV
Lamp Output Current Short Circuit, Lamp ON 50 100 - mA
Lamp OFF - 1.0 100 mA
Lamp Driver Terminal Voltage ILAMP = 50mA - 1.3 2.0 V
Supply Current Lamp OFF - 20 40 mA
Power Supply Rejection 200Hz, 200mVrms - 40 - dB

Note 1.Measured with a stereo composite signal of 80% stereo, 10% pilot, and 10% SCA.
Note 2.Total resistance from Pin15 to GND, to set reference frequency at Pin11 to 19kHz ±10Hz.



Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind. Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre

NTE-ECG replacement list as pdf-file
Diagrams and Info of most NTE-ECG Components

Anzahl:
Bewertungen

Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
Schnellsuche
0 Waren
Hersteller
Hersteller Info
andere Produkte
Sprachen
English Deutsch
Währungen